Progress so far...

June 30th 2009 - 22 stone 4Ibs. Current weight - 17 stone 1Ib. Weight loss - 5 stone 3Ibs. Commuting miles - 3389.
Non commuting miles - 359. Mileage this week - 101 miles. Total mileage - 3748 miles.


Thursday 31 December 2009

My Marin East Peak MTB.

No pedal today, so I thought I'd do a "My bike" feature. Today it's my Marin East Peak full suspension MTB. This will be a short lived feature I think, as I've already done my commuter and I have only 2 bikes in my stable! Hmm, what can I sell?

















It's looking a bit dirty here as this pic was taken on my first off road ride since I've been back pedalling.

It is equipped with Rock Shox forks, definately a bit primitive now as they are about 10 years old, just like the rest of the bike. But they do the job. I had to upgrade the rear shock when I had the bike to cope with a MTBer who was slightly heavier than the norm.

It is fitted with pretty much all round XT groupset, although the Avid V brakes do a job as well as their Shimano equivalents. I have never ridden on disc brakes so I can't comment on if I'll be doing a conversion a bit down the road.

The wheels are Mavic rims, the best for doing trailside puncture repairs in my opinion. Wifey's bike has Ritchey rims and they are a bastard to change a tyre on. You always end up puncturing the tube when levering the tyres back on. Very irritating!

A closer inspection of the bike reveals a bit of its history. Which if memory serves goes something like this. I had an Orange P7 as the aquatic photo from  a day or 2 ago shows. I then part chopped it for a Specialized full suspension bike. Does anyone remember the box frame multi link rear suspension bike? No? Anyway it was one of those. It rode fabulously well during the summer, but unfortunately it was not built for an English Winter. Everything siezed on the rear suspension and it became awful, even with intensive maintenance. It had to go. Wayne at my local bike shop had his own Marin East Peak frame that he was due to build up into a bike but he didn't really fancy it too much. He was after a play bike really not a trail bike and he always commented on how much he liked my Specialized. I think you can see where I'm going with this. The deal was done, a straight swap was made after Wayne transferred all the bits from my Specialized to the Marin. Hence the Specialized Crank, stem and hubs on my Marin.

The only other bit worth a mention is the Brooks saddle. We all need a comfy Bum!

It rides really well, what I would say about it is that you don't notice the suspension, even when grinding your way uphill. But you do notice how much it is helping if you ride the same trail on a rigid. That seems the best type of suspension to me.

I thought I'd finish with my Muvi helmet set up. I think the day before it went into stand by mode because it was pretty quiet apart from my panting that is!






You can just see the self tappers and velcro strap from the sports pack. I hope I've got it sorted to do more than 24 minutes now!

Looking at the met I might be up for an off road pedal tomorrow, I'm looking at a few bridleways over Clent. Although the commuter need a bloody good clean after yesterday's ride. So that will be on the agenda for today.

As we have the "Spawn of Satan" we won't be doing anything tonight so It just leaves me to wish you all a very happy new year. Safe miles everyone! And keep going, next year we can all only get better with more poundage shed!

11 comments:

  1. Hi, I've just swapped my old saracen cro-mo hardtail frame for an east peak (gotta love ebay). Didn't want to but a back injury made me consider a full susser. It looks the buisness and rides great with a revelation 426 u-turn air fork. At 140mm the fork gives the bike a lovely slack head angle, nice and ligt too :)
    I'm in full agreement about the brooks too, the leather on my b17 is quite soft so I'm going to lace the sides together for a bit more stiffness (leather bootlace from ebay).
    Also, I swapped the swingarm pivot bushes for sealed cartridge bearings (9.5x7x22mm), made a new pivot shaft and spacers, well my dad did on his lathe :)
    Absolutely no friction or sloppyness now, well worth doing.
    Happy riding
    Al

    ReplyDelete
  2. p.s. clarks sx hydraulic disc brakes (£45 - chainreactions) are great, powerfull, not too heavy, cheap and british made.

    ReplyDelete
  3. How did you get disc brakes onto the swingarm? Has your already got the disc brake bracket on there?

    Thanks for stopping by too!

    ReplyDelete
  4. The frame came with a bracket bolted on, looking through the marin website these were sold as an official upgrade. As the bracket on mine is tatty and a little over engineered (8mm ally plate), I'll knock one up inn my dad's workshop. When Itake it off I'll let you know the hole spacing for the plate and swing arm.
    The swingarm itself looks like an early one, box-section tubing 15mm square ?? Different to yours, I'll post some pics and send you a link when I get chance, or send me an email to a49942@gmail.com and I'll reply with some pics :)

    ReplyDelete
  5. Cool, looking forward to seeing it mate! :-)

    ReplyDelete
  6. This is it before I fitted the rear brake, you can just make out the bolt-on caliper mount.

    http://picasaweb.google.co.uk/alistairjolly/Marin?feat=directlink

    ReplyDelete
  7. Is that the newer or older version of mine? I vaguely recall that swing arm being the older version before the solid beam swing arm like mine.

    Not sure though, ta for taking the trouble to post the piccy!

    ReplyDelete
  8. I'm pretty sure that mine is the older version, second gen possibly. You should have bolt holes somewhere in your swingarm to mount a caliper bracket, it was an optional upgrade up untill they made the swingarm with the caliper mounts.

    Long live the East Peak :D

    ReplyDelete
  9. I'll have a look, cheers mate.

    ReplyDelete
  10. There's a pdf on marin's website that shows all the disk mount brackets :
    http://www.marin.co.uk/2010/downloads.php

    Mounts #2 and #3 are on ebay at the moment

    ReplyDelete
  11. inspiring insights you are sharing. I love the way you are sharing it. Is there any way I could get updated for more? mountain rims

    ReplyDelete